Powermatic PWBS-14CS, POW 14" WW Bandsaw w. stand (2Pc)

Looking for a 14-inch band saw with all the bells and whistles? Look now more, you have found it. The Powermatic PWBS-14 CS has gone a couple steps further than most other 14-inch models. Powered by a 1-1/.2hp, 1 ph 115 volt motor that uses a flat poly V belt to keep the 93-1/2" blade cutting up to the 6" height by 13-1/2" width capacity. The table is 15x15-inch with a cast iron 5x15-inch extension for even more surface area. You should have no trouble seeing with the 60 watt halogen lamp built in and there is even an air pump that will keep the chips and dust away from the workpiece. Blade capacity is from 1/8-inch up to 3/4-inch and changing is made simple with the Carter Quick-Tension release. The saw also features a durable micro-adjustable dual bearing blade guide system above and below the table. A built in 4-inch dust port is standard along with the adjustable mitre gauge and T-style rip fence with resaw assembly. Table height is a comfortable 44 inches and the table will tilt 45 degrees to the right and 10 to the left. The motor is completely sealed up and is in the rigid one-piece welded stand. 60 watt halogen lamp built into the body, providing direct light on blade and workpiece while cutting. Chip blower ensures a clean, visible cut line. Extra-large, two-piece cast iron table consists of a 15" x 15" tilting. 45 degrees right, 10 degrees left section and a fixed 15" x 5" extension for a total working surface area of 15"x20". Balanced, nine-spoke cast iron wheels run smoothly. Easy-to-read tensioning gauge settings indicated in "blade width" increments. CARTER quick tension release lever speeds blade changes. Features durable micro-adjustable dual bearing blade guide system above and below the table. Full 6" under-guide capacity with 13-1/2" frame-to-blade clearance. Built in 4